An efficient and flexible alternative that turns your existing roof into a powerful energy source. Thanks to the innovative cross-connection system, it guarantees stability and a long service life.
The SolarStand® on-roof system creates an aesthetic and uniform surface that is not only functional, but also blends harmoniously into the overall appearance of your roof. Individual roof features such as possible filling areas, skylights, hatches, chimneys or snow guards can be elegantly integrated.
Following straightforward planning, the complete substructure of your rooftop solar system can be installed without the use of special tools. Including the screws and rivets, the system consists of just 10 - 15 different components.
In addition, the insertion system absorbs all existing roof movements so that these are not transferred to the photovoltaic modules. This gives you a solid basis for reliable and long-term operation of your entire solar installation.
By using framed standard modules, you benefit from outstanding cost efficiency and flexibility, as you can immediately use the latest module generations with the system. This allows you to achieve the best performance ratio per m2 with framed high-performance modules on your PV system.
We create an individual project report for each system which, together with the general planning instructions, provides a basis for planning and realising your system. We supply the appropriate mounting rails for each framed solar module directly from our warehouse in Switzerland.
The ST.E.35 on-roof system is manufactured to the strictest quality standards. The aluminium profiles used and all other components come from Switzerland and the nearby EU region. This enables us to guarantee a long-term and reliable solution, which is further supported by the high availability of the components.
Das Aufdach-System ST.E.35 ist besonders flexibel einsetzbar und ermöglicht eine individuelle Konstruktionen ganz nach Ihren Anforderungen. Das Einlegesystem lässt sich an jede Projektgrösse anpassen – vom Einfamilienhaus bis hin zu grossen Industriegebäuden (siehe Referenzen).
No special tools are required for installation. The sophisticated insertion system allows you to get the system ready for use in the shortest possible time (see Downloads).
The necessary clamping of the modules with visible clamps, which is common with other systems, is not necessary with this system. Here you can integrate the solar modules evenly into your roof surface. The result is an aesthetic and uniform roof.
Do you need support in planning and sizing-up your photovoltaic installation, or are you looking for a PV-installer near you? We offer quick, straightforward advice!
Different mounting systems are available for attaching solar modules to roofs: On-roof and in-roof systems, both of which can be used as clamping or insertion systems. An on-roof solar system is mounted over the existing roof covering and offers an efficient way of generating electricity without changing the existing roof structure. This enables flexible and cost-efficient retrofitting, both for modernisations and extensions to existing roofs. Roof elements such as skylights, roof windows or chimneys can be aesthetically integrated into the overall concept.
Our on-roof system is extremely versatile and is basically suitable for any pitched roof with an inclination of 7° to 60°. Thanks to its scalability, it can be used on roof surfaces of any size, from detached houses to large industrial buildings. This versatility makes it ideal for residential, agricultural, commercial and industrial buildings. Even complex roof shapes or extensions can be realised without any problems. Our system therefore offers the optimum solution for your next rooftop solar installation.
The installation of our roof-mounted system is particularly simple and requires no special tools. Only 10 to a maximum of 15 different components are used within the entire system. Screws and other standard parts are already included. The insertion rail, which is installed to match the module type, enables the individual solar modules to be installed quickly and protects the module from all forces that can be caused by dilatation (expansion).
For detailed instructions on how to install our roof-mounted system, visit our Downloads section. There you will find step-by-step instructions that clearly illustrate the entire installation process.
Photovoltaic installations are encouraged in Switzerland. Various forms of compensation are therefore available at the federal level (feed-in remuneration, one-off reimbursement for small or large installations, cost financing). Individual cantons and municipalities offer additional subsidies for photovoltaic installations. In the cantons of Thurgau and Waadt, battery storage is also encouraged.
To fully utilise your options here, we recommend that you visit the Pronovo AG website. The website provides you with lots of information about subsidies for renewable energies. You will also find an easy-to-use tariff calculator, which you can use to calculate your individual subsidy amount in just a few steps.
Pronovo AG is an accredited certification body in the field of renewable energies. Among other things, it is responsible for recording guarantees of origin and processing funding programmes on behalf of the Swiss Confederation. The company belongs to the Swiss transmission system operator Swissgrid and is subject to the supervision of the Swiss Federal Office of Energy (SFOE).
We will be happy to help you if you need support in planning a SolarStand® rooftop system. Among other things, we will provide you with all the relevant connection details for the system in PDF and DWG formats.
The SolarStand® rooftop system is developed and distributed in Switzerland. All components come either from Switzerland or the neighbouring EU region. Its unbeatable price/performance ratio, flexibility and high quality are particularly impressive.
Manufacturers of solar installations and solar systems that fulfil the criteria of the umbrella organisation Swissolar and are committed to offering high-quality, state-of-the-art products are awarded the SOLARPROFIS® label.
Solarteam AG, manufacturer and distributor of the SolarStand® rooftop system ST.E.35, has been a SOLARPROFI® since 2009. Solarteam AG is also ISO9001-certified.
Currently no entries.
Solarteam AG has been a leading supplier of photovoltaic substructure systems for more than 15 years and is one of the most innovative companies on the market.
Are you convinced and have already decided in favour of our solution? Request a precise quote now, customised to your project.
Do you still have questions or do you need support with the planning and realisation of your photovoltaic system? We are happy to help you.
Gregor Trefny, Managing Director
SolarStand / c/o Solarteam AG
Lettenstrasse 7
CH-6343 Rotkreuz
